Sigelei Fuchai 200w by Sigelei

Sigelei Fuchai 200w.

I have to say, this bad boy is a WORKHORSE. It has 200w (Watts) of RAW Power.  With the right coil build, this bad boy can handle it.

I think Sigelei has overdone themselves. This is a GREAT MOD for a GREAT Price.

This MOD Holds 2 18650 Batteries. I use the Samsun 25R Batteries but it's recommended to use the Sigelei 35a High Drain batteries. I think it's more about the Sigelei Brand. You are going to Pay About $12.00 a Battery for the Sigelei Brand vs $4.99 for a GOOD Samsun 25R Green Label.

Below is the Specs of this MOD.

TECHNICAL PARAMETERS:

Size: 102*56.5*24 mm;    Net Weight: 196g;    

Material: Zinc Alloy

Variable Wattage Range: 5.0W - 200.0W                  

Output Voltage Range: 0.5V -7.5V  

The maximum current : 25A                  

Battery Voltage Range: 6.4V - 8.4V                    

Battery : 2*18650 high-drain batteries                   

Temperature Adjustment Range: 100-300°C / 212-572°F 

Atomizer Ohm Range: 0 .05 ohm - 2 .5 ohm (supports regular kanthal, nickel and  titanium wires) 

 Note: It is recommended to use Sigelei 35A high-drain batteries.

MAIN FEATURES:

Max Power 200W                                 

Ni200/ Ti Temperature Control mode / Wattage mode 

Input High Voltage Warning    

Low Voltage Protection

Output Short-Circuit Protection 

Low Resistance Protection 

Reverse Battery Protection                    

Overheating Prevention

Source of Specs you can find Here

This also has Temp Control.  On temp control MODS, it's REQUIRED To have Nickle or Titanium Wire or Coils. Temp controll will NOT Work on a Regular Nichrome or Kanthal Wire.

I Love the fact that I can get .05 Ohm coil build to achieve an even warmer vape, granted it burns the batter up quicker with the high wattage but it's more satifying then a lower wattage coil.

For anyone looking for a Starter MOD, I think this is a Good one to consider. Unlike the Sigelei 150w that Retails for around $150. The Sigelei Fuchani 200w Retails for around $65.00. You can find them on ebay for as cheap as $49.95 up to $52.99 which is still an AWESOME Deal for a First mod.

If you refer to the Specs above you can see that it will cover ALL Of your Vaping needs. It's a Tad heavy, but I like that, it lets me know that I've got a MOD in my Hand instead of something lite.

The Sleek Design of the MOD is awesome. NO Sharp Corners, Has a Rubber type coating on it to make it antislip in your hands, it also comes with a Rubber cover (Which I leave off, hard to get it on and off), It will also protect the coating, it tends to hold the juice if any drips on the side of the MOD, hard to wipe off. Easy to See LCD Display and easy to Configure how you want your wire with BIG Display to see what your Voltage, Wattage and Temp is.

It's FULLY LOADED With all kinds of Features.  It tells you if it's to Low of an Ohm or to High of an Ohm and even low Battery Indicator.

In all, It's a Really Rounded out MOD for the price.  I'd recommend this for anyone Beginner, Intermediate and Advanced Vapers.

The Tank I've got attached to this, is a UWell Crown.  This will be another post entirely!

Happy Vaping

GR-Star 40w with Temp Control

Today's post is mainly focused on the Gr-Star 40w with Temp Control MOD for Vaping.

I've been using this mod for better part of 6 months so far and I LOVE it.  It has a DNA40 Chip in it. Meaning it has the capability of going from 1w all the way to 40w. It also has a 200* to 600* temp control setting that allows you to control the temp of your vaping.

Temp control MODS Needs Titanium or Nichrome 200 Wire. I use a 26g Ni200 Wire for my MOD. I use this mainly on my Plume Veil v3 Dripper because it burns so hot that the tank can't keep up with the juice requiremnts.

I build my Coil with my Kuro Coil Building Kit. Ranging from 1.0mm all the way to 3.5mm in Inside Diameter, Depending on the Ohm of the coil will determin how many wraps.  And since this is a Sub Ohm, Meaning anything below 1.0 Ohm is Sub Ohm. My Coils need to be built to around .17 Ohm which is the Lowest my MOD will accept for a coil in Temp control.

This would be 12 wraps on a 3.0mm I.D. Rod. The coils also need to be seperated about 1/64th apart basically none of the coils touching each other. Then wicked with Cotton and saturated with your eLiquid of choice.

This MOD Also uses a Single 18650 Rechargeable Battery. I Keep 2 on Hand, while Vaping on one, the other is charging, then swap out once one is dead for the newly recharged one.

On my MOD, I use a Kangertech Sub Ohm Mini Tank which holds around 4.5ml of eLiquid. It has a Mini RDA (Rebuildable Adamizer) which is a Money Saver. I don't have to purchase coils, I can build my coil on my RDA, wick it, juice it and Vape it. I think it's the BEST Tank that I've purchased. eBay has these tanks for $20.00 which is a GREAT Deal considering most of them are around $50.00.

I think I about covered the Post for today on my Gr-Star, I'll be posting a photo later on of my MOD, I'm going to Post a Few Photos on some Coil builds as well.  After all this is a This and That Blog, so I'll cover just about everything!.

I HATE Cold Weather

Have I mentioned that I DO NOT Like Cold weather? Well I do. For 1, I have rotory cuff damage in my right shoulder and starting to get it in my left.  All the Perks of being in a wheelchair.  The ups and downs of medical problems on the constant uprise.

So my joints are ALWAYS hurting. Can't get a good night sleep, always up and down. But the MAIN Reason I DO NOT Like the Cold weather is it's hard for me to get around being in a wheelchair.

The snow, I get stuck in, I can't shouvle very well on the ramp, deck and sidewalk so it limits my ability to go anywhere during the colder months expecially when it snows.

I also can not get out in my workshop to do some work, for anyone interested, I have a Blog and a Facebook page here.  Blog ==> Handi's Workshop and Handi's Workshop Official Facebook Page.

This is where I document my Projects and all when I have time to do them. So come take a gander at what I do.

2015 4th of July

We had 4th of July on the 5th of July cause we didn't have any Fireworks and we weren't Feeling well.  So we decided to Buy some Fireworks when they were on Sale and Celebrate the day after.



Enjoy the Video.

iTaste MVP 2.0 Vaporizer

Who of my Followers Vape?

I've just discovered a Safer means of Smoking or as well call it #Vaping.  It's a means of Vaporizing eJuce/eLiquid into Vapor with 5 Major Ingredients.  This produces a Smoke like Vapor simular to that found in Fog Machines.

Ingredients include:

PG (Polyethlene Glycol)
VG (Vegatable Glicern)
Food Grade Flavorings used for Candy Making
Distilled Water or Alcohol
Nicotine (Optional)

So I guess it would be 4 Major Ingredients.  These Ingredients make up what we call eJuice or eLiquid.  When combined together, it produces as I mentioned Smoke like Features without the Health problems you get from Triditional Smoking.

There are NO:

Tar
Chemicles
Additives
And Many other things in Cigarettes

All of the Ingredents in the eJuice/eLiquid are ADA and FDA Approved.  They are found in MANY Food Stabilizing Ingredients.  Also found in Medications for stabilizing.

So all in all, It's a SAFER Alternative to Smoking and I HAVE Been promoting the Use of Vaping over Smoking.

I've quit smoking over 10 years ago and decided to check out the Vaping for the love of Different Flavors.  Anything from Strawberry Cheese Cake, Cherry Cheese Cake, Peanut Butter Waffer to many other Flavors.

Your Commercial Blend of eJuice/eLiquids you want to Avoid because they do contain other Ingredents that can be harmful to your Health.  So if you are interested, Stick with a Well Known Vape Shop that MAKES Their own Juice on the Spot.

We Shop ONLY At www.cravinvapes.com NO Where else because we know what is added to the Juice at the Local Vape Shop to us.

We went the Extra mile to even Rebuild our Coils so it wouldn't cost any extra money in Purchasing Coils for our Tanks.

Here is a Video of me Vaping on my (Used) NEW iTaste MVP 2.0 Battery mod with a KangerTech ProTank Mini II with a 3.0 Ohm Coil Build.

Enjoy the Video and Check into Vaping.  As you can See in the 15 Second Video from Vine, It looks just like Smoke a Cigarette.  ONLY Thing Addictive to Vaping is the Nicotine if you Include it in the Ingredients.  The Flavor would be Addictive, you'll find yourself trying different Flavors and having so many bottles of Different Flavors you won't know what to do with yourself, Then probably catching yourself Buying new Batterys and Tanks to Achive a (Cloud Chaser) Point of view such as I've been doing.